SonoSite Portable Ultrasound

Point-of-care portable ultrasound system for bedside imaging and procedural guidance.

Skantra Resource

AI overview

Compact, battery-capable ultrasound platform used across the OR, ICU, ED, and bedside for diagnostic imaging, vascular access, and procedural guidance with interchangeable transducers.

Ask Skantra about this

Common uses

Vascular access (central / peripheral line placement)
FAST exam in trauma assessment
Cardiac and lung point-of-care ultrasound
Procedural guidance (paracentesis, thoracentesis, nerve blocks)

Safety notes

Use only hospital-approved disinfectants compatible with each probe type
Do not immerse connectors; follow probe-specific reprocessing guidance
Avoid excessive probe pressure on fragile tissue or recent surgical sites

Setup instructions

1
Initial inspection — verify the machine is clean and free from visible damage.
2
Initial inspection — inspect power cord, battery, probes, and cables for wear or defects.
3
Initial inspection — confirm the correct ultrasound probe is available for the procedure.
4
Position the machine — move the ultrasound system to the desired patient care area.
5
Position the machine — lock wheel brakes if equipped.
6
Position the machine — ensure adequate space for operator access and cable movement.
7
Power on the system — plug the machine into a grounded electrical outlet or verify battery charge.
8
Power on the system — press the power button to start the system.
9
Power on the system — allow the system to complete startup diagnostics.
10
Connect the probe — select the appropriate transducer/probe for the exam type.
11
Connect the probe — align the connector properly and securely attach it to the machine port.
12
Connect the probe — confirm probe recognition on the display screen.
13
Prepare the patient — position the patient appropriately for the exam or procedure.
14
Prepare the patient — expose the required anatomical area.
15
Prepare the patient — apply ultrasound gel to the probe or patient skin.
16
Configure imaging settings — select the desired exam preset (cardiac, vascular, abdominal, etc.).
17
Configure imaging settings — adjust depth, gain, and image settings as needed.
18
Configure imaging settings — confirm image quality before beginning the procedure.
19
Perform the scan or procedure — place the probe gently on the patient.
20
Perform the scan or procedure — adjust probe angle and pressure for optimal imaging.
21
Perform the scan or procedure — save images or clips if documentation is required.
22
Post-procedure cleanup — remove ultrasound gel from patient and probe.
23
Post-procedure cleanup — disconnect and disinfect probes according to facility policy.
24
Post-procedure cleanup — clean touch surfaces and machine components.
25
Post-procedure cleanup — return the machine to charging if battery-operated.

Troubleshooting

Probe not recognized
Reseat the transducer connector and confirm it's fully latched; try another port or probe to isolate.
Poor image quality
Reapply gel, adjust depth/gain, and verify the correct exam preset and probe for the application.
Won't power on
Confirm AC power at outlet, check battery charge, and try powering on with AC connected.